Thanks For Using The Performance of a Lifetime!



Chatroom Auctions & Paid Classifides DDDPL's Additional Job Search










FAQ
Last visit was: Mon Sep 25, 2017 12:25 am
It is currently Mon Sep 25, 2017 12:25 am



 [ 1 post ] 
 "...How Multiple Passwords Affect Router Access" 
Author Message
User avatar

Joined: Mon Sep 13, 2010 1:47 pm
Posts: 45372
Post "...How Multiple Passwords Affect Router Access"
CCNA Cisco Certification Training Case Study: How Multiple Passwords Affect Router Access
by: Chris Bryant, CCIE #12933



Your CCNA certification exam efforts must include practicing with different password types and knowing how to configure them on a Cisco router - but for CCNA exam success and to thrive in real-world networks, you also have to know how to examine a Cisco router configuration and determine the level of network security that is already present. After all, most routers you work with already have passwords set, and it's up to you to determine if those passwords are getting the job done.

Let's start with a telnet password. Telnet passwords are configured on the VTY lines, and no telnet access is enabled on a Cisco router by default. If you saw the following configuration, what would it mean?

line vty 0 4

privilege level 15

password baseball

login

That small Cisco router configuration means three things - first, Telnet access is enabled. Second, the password is baseball. Third, the "privilege level 15" command means that any user who attempts to Telnet to the router and knows the password will automatically be placed into privileged exec mode. (If that command were not present, the user would be placed into user exec and then prompted for the enable password before being allowed into privileged exec.)

You may not want to give that level of access to all incoming Telnet connections. If you walked into a client's router room and saw this configuration on a router, what would it mean to you?

username halas password 0 bears

username ewbank password 0 jets

username ed privilege 15 password 0 mcdaniel

line vty 0 4

login local

This configuration means three things as well. Each user attempting to telnet in will be prompted for both a username and password. Each individual user must enter the password that's been assigned to them. For example, the user "halas"would have to enter the password "bears" to successfully Telnet into this router. The command "login local" under the VTY lines means that this local database of usernames and passwords will be used for authentication.

Again, by default, users who are Telnetting in will be placed into user exec mode by default. Only users with "privilege 15" in the middle of their username / password definition will be placed into privileged exec immediately upon login.

Notice that zero in each of the username / password statements? I didn't enter that when I configured these statements. This number indicates the level of encryption the password is currently under; a zero is the lowest level of encryption, indicating that the passwords aren't encrypted at all. There's a single line near the top of a Cisco router configuration that tells you why.. which of these three is it?

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

Simple enough! The password encryption service is off by default. To turn it on. just run the command service password-encryption. Let's do so here and then take a look at the configuration.

R1(config)#service password-encryption

username halas password 7 1415170A1E17

username ewbank password 7 070524585D

username ed privilege 15 password 7 082C4F4A08170C121E

Now that's what I call encryption! Note that the zero has changed to a "7" - that's the highest level of encryption on a Cisco router, and as you can see, it's very effective.

Knowing how to read a Cisco router configuration is a valuable skill for both the CCNA certification exam and working with production networks. Keep practicing, keep studying, and you'll have the coveted letters "CCNA" behind your name soon!


About The Author

Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage (http://www.thebryantadvantage.com).

For his FREE seven-part course, “How To Pass The CCNA”, visit the website and sign up today! Daily free CCNA, CCNP, Network+, Security+, and A+ certification questions, too!


Copyright © 2001-Present ArticleCity.com

[Note: Due to size restriction, this articles title has to be abreviated. Apologies to Chris Bryant. - Admin.]

This article was posted by permission.


Thu Aug 02, 2007 3:09 pm
 [ 1 post ] 

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  






Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.